Two Wheeler Chassis - Types Explained

The major role of the Two-Wheeler Chassis also known as the Motorcycle Frame is to hold the various pieces together in a rigid framework and keep them from falling apart. In other terms, the motorcycle frame is the skeleton that supports the suspension, seats, handlebars, fuel tank, and engine.

There are several varieties of motorcycle frames, which are chosen by the bike's budget and intended performance. Aside from the materials, we'll take a brief look at the many types of motorcycle chassis, as well as their advantages and disadvantages.

People's health and wealth are suffering as a result of increased pollution and fuel expenses. Thus having manufactured the greatest two-wheeler chassis that successfully address any concerns.

Following are the different types of two-wheeler chassis explained:

Backbone frame

In layman's words, a backbone frame serves as the spine of the bike, connecting vital components. The engine is attached to the frame, which links to the steering head and rear suspension pivot point. In this case, the engine normally hangs off the chassis rather than being cradled or considered a stressed part. Because of its basic design, it is the most economical form of chassis.

A backbone frame, on the other hand, provides less torsional stiffness and strength and is hence utilized on low-cost bikes with smaller engines.

Cradle frame- single

The frame serves as the engine's bed, with two tubes connecting the steering head or yoke. The first goes over the engine, while the second i.e. bottom tube comes from below. Two-wheelers like Royal Enfield use a single cradle frame.

Doubt cradle frame

A double-cradle frame supports the engine with two tubes running beneath it, as opposed to one steel tube on a single cradle frame. While the frame is inexpensive, it has a major advantage in terms of strength and stiffness over a downtube chassis. The architecture is capable of withstanding enormous forces generated by forceful braking and steep lean angles.

In Conclusion

If you are looking to manufacture two-wheeler chassis and fabrications collaborate with the one who specializes in design development and manufacturing of various types of sheet metal components. The manufacturer’s primary aim is to provide nothing but the best to its clients by maximizing resource efficiency at economical costs. For more information, visit Ogata Motors India Private Limited.